| Technical data of the Steelflex system hall |
|
You will find below brief information about the technical data of the Steelflex hall. More detailed information can be found under Frequently asked questions.
Type | Saddle-roof hall | Multi-bayed halls | Pent-roof hall | Crane hall | Flat-roof hall | | 
| 
| 
| 
| 
| Dimensions | Remarks | | All hall types also available as mult-bayed halls | | Crane up to 20 t useful load | | Roof pitch | Variable Standard: 10° | Variable Standard: 10° | Variable Standard: 5° | Variable | <3,5° | Width | 10.00 - 50.00 m | Width per hall bay: 10.00 - 50.00 m | 5.00 - 20.00 m | 10.00 - 35.00 m | 10.00 - 50.00 m | Length | Random, in variable modules System module spacing: 5 m | Random, in variable modules System module spacing: 5 m | Random, in variable modules System module spacing: 5 m | Random, in variable modules | Random, in variable modules | Side height | 3.00 - 10.00 m | 3.00 - 10.00 m | 3.00 - 10.00 m | 3.00 - 10.00 m | 3.00 - 10.00 m | Snowload | as required | as required | as required | as required | as required | Anchoring | On individual pad or ring beam foundation via base plate with anchors, steel stakes or pre-embedded anchoring; in exception cases anchoring is also possible with steel stakes on asphalt or paving stones. | Special dimensions | Almost always possible for the width, height or length! | Gates/Doors | Sectional, rolling, sliding or high-speed gates, two-leaf doors, glass doors, fire doors | Windows | Swivel/pivot-hung windows, display windows, rows of windows in roof and wall or domelights are possible | Facade and roof | Optionally non-insulated trapezoidal sheets or insulated sandwich panels with insulation up to 100 mm, mor insulation if required | Smoke vents | Can also be delivered if required | Construction | Made of hot-dip galvanized steel, but painting is also possible | Technical Drawing | Steelflex (PDF) |
 |
